Description

Thank you for your interest in EasyGate gates and automation.

Price includes the following:

Aluminium construction.

Frame Length: 1m to 8m (not including the 300mm tails at one end)

Frame height: 1m to 2m (based on an installed gate with wheels and wheel track)

Tail length: 300mm top and bottom at one end

Sides and top rail:

Option 1: 50 x 50mm

Option 2: 50 x 80mm

Option 3:50 x 100mm

Bottom rail: 100 x 50mm

Louvre blades

Option 1: 120mm wide x 16mm thick in the centre and made of hollow core aluminium extrusion

Option 2: 150mm wide x 25mm thick

Layout: Horizontal 

Centre ribs: If required 50 x 50mm  

2 x steel wheels with sealed bearings. For larger gates we will install 4 wheels

Wheel track double the length of gate to anchor to your existing driveway.

Concrete anchor pins for the wheel track

1 x top 4 roller guide bracket

1 x side mountable end catcher for front/top corner of gate

1 x ground stopper for rear bottom of gate

1 x Top guide rail fastened to top of gate to reduce paint wear area from the top guide rollers rubbing on side of gate 

2 x end plugs for the tails at rear end of the gate

Powder Coating colour: Black is popular but we can also powdercoat most steel roof colors available.

Optional Automation package with keypad, exit button, 3 x remotes, and DIY transformer and backup battery $799 if packaged with the above sliding gate.

Delivery cost: TBA

To get a quote for your gate, please confirm by phone or email your delivery address, name and contact number. We will need your distance between your current posts and the finished height you want. If you do not have post please tell us as we can also quote on alloy ones. Please also check if there is any slope to the current driveway (left to right of the posts) as this will affect the quote and the finished look of the gate. A sloped driveway cost 10% more than a standard level gate. Once we have this information Easygate will then generate the quote and email this to you for confirmation. sales@easygate.co.nz 

Once confirmed a 50% deposit is required to start the order process and placement on the EasyGate fabrication scheduling. It will take a few weeks to complete the gate ready for delivery. 50% balance of payment is due when EasyGate are ready to delivery your gate. Note: Installation is not included.

All quotes are based on the gate viewed from inside of the property. Tails of the completed gate will there for be on the left or right depending on the direction the gate will open along your fence. Example: If the gate opens from left to right the tails will be on the left, if your gate requires a sloping bottom rail to match your driveway we need two height measurements from the ground to the top of the gate. Frist height at the leading end and second height at the tail end. When looking from the inside of the property the top edge of the louvre blade slopes down and away to the outside of the property. Any reinforcing strips are welding on the side viewed from the inside of the property.

Click Here for information on installation:

The buy now tab linked to this product will not buy you a gate as no gate has been assigned to the tab. You can order gates by phone 0800774636 or email info@easygate.co.nz