Thank you for your interest in EasyGate gates and automation. Our products are able to be installed by most tradesman or a DIY person that can read and implement simple instructions.
EasyGate Cantilever construction: The outer frame is based on the aluminium Manor style slider bolted with stainless bolts to steel cantilever base frame. This combination reduces the total gate weight by approx 1/3 which reduces the long term effects of "wear and tear" of the moving parts including automation without compromising strength.
Price includes the following:
Outer frame and horizontal beams 50 x 50 box Aluminium
Bottom rail 100 x 50 x 3mm heavy duty box Aluminium
Vertical Pickets 19mm diameter with 100mm spacing (approx 80 mm physical gaps) Aluminium
Cantilever wheel channel with 2 vertical supports and one diagonal brace in dura steel
2 x cantilever steel wheels with 8 sealed bearings.
Inserted into the end of the steel channel is a special catcher roller. This is to aid in locating the gate to the catcher when closed.
Concrete anchor pins for the wheel track
1 x Heavy duty top 4 roller guide bracket
1 x side mountable end catcher to be mounted onto your post to capture front/bottom corner of gate
1 x ground stopper for rear bottom of gate to stop gate in the fully open position
2 x end plugs for the tails at rear end of the gate
Powder Coating colour: Satin Black
Height from ground to top of the gate: upto 2m
Frame length Upto 6m .
Total cantilever length including diagonal brace upto 7.8m
Note: The height of the finished gate will depend on the height you install the cantilever wheel assembly to your concrete foundation. If the wheel assemble is positioned flat (no room for adjustment down but can increase) then the gap under the gate will be approx 80mm
The buy now tab linked to this product will not buy you a gate as no gate has been assigned to the tab. You can order gates by phone 0800774636 or email email@example.com
To get a quote for your gate, please confirm by phone or email your delivery address, name and contact number. We will need your distance between your current posts and the finished height you want. If you do not have post please tell us as we can also quote on alloy ones. Once we have this information Easygate will then generate the quote and email this to you for confirmation. firstname.lastname@example.org
CLICK Here for the installation assist information