Requires 230v power at the gate.
The control board is equipped with an adjustable overload protection circuit, which will detect obstructions in the gates path when contact is made between the two.
Limit switches are fitted to the gear rack at each end of the gates travel and are activated when these pass the motor, therefore stopping the gate.
Gate direction is switchable from left to right to assist in installation speed.
Optional Remote push button can be pre-set to 4 different configurations from standard cycle, open to stop and close, close only or open only.
Auto Close Timer has 3 settings of 10, 20 and 30 seconds delay or can be disabled.
Gates, gear rack, installation etc and wiring not included. Gate MUST be level and free moving for automation to be effective.
Includes: Motor and 2 remotes only
Max Gate Weight: 1000kgs (based on flat ground with large wheels for reduced friction)
Power Supply: 230v
Motor Speed: 1400RPM
Output Torque: 45N
Gate Speed: 12m per min
Max Gate length: 8m
Gearbox: Oil filled for cooler operating Hydraulic Mobil DTE 24 or Shell Tellus
Protection Class: IP44
Duty Cycle: 20%
Note: The motor is designed for heavy gates that require high amperage at start up. You can change the size of the amperage at start up if you reduce the size of the capacitor (The white or black PVC cylinder that is wired to the control board. Roughly 60mm x 25mm. If you have a light gate you may need a size 8 capacitor.