"Frame only" sliding gates are becoming popular with the DIY market. EasyGate can manufacture a rolling gate frame complete with standard gate hardware ready for you to fasten panels/, palings, corrugated iron, villa board etc.
EasyGate build a frame with sides, ribs and top 50 x 50. The bottom rail is generally 100 x 50 as this is the foundation peice of the gate for strength. We then fit a top plate with a lip to allow the guide bracket to run along one side of the gate and keeping the gate upright.
PRICE is based on the Manor style gate price list
Frame Length: From 1m to 8m (not including the 300mm tails at one end)
Frame height: From 1m to 2m (based on an installed gate with wheels and wheel track)
Tail length: 300mm top and bottom at one end
Sides and top rail: 50 x 50mm
Bottom rail: 100 x 50mm
Centre ribs: 50 x 50mm or 50 x 25mm
2 x steel wheels with sealed bearings. For larger gates we will install 4 wheels
Wheel track double the length of gate to anchor to your existing driveway.
Concrete anchor pins for the wheel track
1 x top 4 roller guide bracket
1 x side mountable end catcher for front/top corner of gate
1 x Top guide rail fastened to top of gate to reduce paint wear area from the top guide rollers rubbing on side of gate
1 x ground stopper for rear bottom of gate
2 x end plugs for the tails at rear end of the gate
Powder Coating colour: Black is popular but we can also powdercoat most steel roof colors available.
Optional Automation package with keypad, exit button, 3 x remotes, and DIY transformer and backup battery $799 if packaged with the above sliding gate.
Click here for installation information:
Delivery cost: Not included in prices list here
To get a quote for your gate, please confirm by phone or email your delivery address, name and contact number. We will need your distance between your current posts and the finished height you want. If you do not have post please tell us as we can also quote on alloy ones. Please also check if there is any slope to the current driveway (left to right of the posts) as this will affect the quote and the finished look of the gate. A sloped driveway cost 10% more than a standard level gate. Once we have this information Easygate will then generate the quote and email this to you for confirmation. firstname.lastname@example.org
Once confirmed a 50% deposit is required to start the order process and placement on the EasyGate fabrication scheduling. Allow about 10-15 working days to complete the gate ready for delivery. 50% balance of payment is due when EasyGate are ready to delivery your gate. Note: Installation is not included
If I can be of further assistance please contact us here at EasyGate.