EasyGate has designed this operator to be slim enough to easily fit installations as little as 5cm off the ground. One of the benefits of the 12 volt motor is the ability to use battery backup, (included) think power failure. This system is sold with the EasyGate Step-down Transformer Kit making this extremely user friendly and suitable for a wide range of swing gate automation applications. The transformer is positioned at the mains power point upto 100m from the gate. A 12v voltage cable (optional extra) can be installed to the gate control box located at your gate automation. You can install this cable yourself if you want, along a fence, in a garden, cross concrete paths and driveways etc with little effort.
The E8/500S Single Swing Gate Opener Kit is a powerful 12 volt swing gate automation that can be fitted to most gate installations.
Suitable for medium to large size swing gate to 5m wide (conditions apply).
Press your remote from your car and let the gate opener do the rest!
PRICE INCLUDES GST
Solar Power Kit available for $199 if over 150m from power point plug
Gates, installation and wiring not included. Gate must be level and free swinging for automation to be effective. Please note high wind areas may require a more powerful system such as the Mastiff range of EasyGate opener kits.
If You Have Pipe Farm Gate - available as an optional extra is EasyGate's 'Pipe Gate Clamp Bracket' for $35 - click here to see
1 Year "Back to Base" Warranty
For installation manual on how to install this system please click on the link below
Has an anti-obstruction safety feature that allows the gate to open when an obstruction is observed.
When the gate is closed the non-reversible feature locks it closed!
Auto close function included with Easy external switch to place system into manual mode if you want gates to stay open.
Soft start and finish to increase life of motors and stop noisy gate slam.
They look great in stainless steel and very compact.
Can be installed on gates that open in-to or out of property (PUSH or PULL to OPEN) up to 100 degrees
Can be used with optional extras such as safety photocell beams, keypad access controllers, intercoms, free exit sensors, solar power, lighting and exit buttons.
1 x Electric 500 mm actuator arm
1 x Adjustable Bracket with pins and locking nuts
I x Outdoor Control Box with control board fitted
1 x Transformer
1 x Keypad
1 x Exit button
3 x Remotes with Receiver
1 x 7amp Rechargeable Battery
1 x Installation manual
1 yr back to base warranty on motors and control board. (conditions apply)
DIY INSTALLATION up to 150m from power plug:
The portable Transformer can be easily plugged in to any mains power-point up to 150 metres from your gates. The transformer will reduce the power to a safe 18volts so you can then run standard house cable or an extension lead with the end plugs removed, (which ever is cheaper) above or below ground or even along your fence to the auto-gate control box at the gate. This will save you hundreds of dollars on installation costs of mains power and you can install this yourself.
Link to the D1 control board manual: