EasyGate's new Slat style is a modern design that increases privacy while still maintaining some transparency and wind flow. EasyGate can also build the same style for Double or Single swing gates with the slats either horizontal or vertical.
Price includes the following:
2 x steel wheels with sealed bearings. For larger gates, we will install 4 wheels
Wheel track double the length of gate to anchor to your driveway
Concrete anchor pins for the wheel track
1 x top roller guide bracket
1 x side mountable end catcher to be mounted onto your post to capture front-bottom crner of gate
1 x ground stopper for rear bottom of gate
2 x end plugs for the tails at rear end of the gate
Powder Coating colour: Satin Black, but we can also powdercoat most steel roof colors available.
Bottom rail: 100x50x3 RHS box
Top rail and vertical ends: 50x50 RHS box
Slats: 75mm wide x 17mm thick
Slat spacings: 10mm or 25mm (main photo shows 10mm spacings)
60mm wide rub rail on top rail for guide rollers (to stop rollers wearing off paint)
To get a quote for your gate, please confirm by phone or email your delivery address, name and contact number. We will need your distance between your current posts and the finished height you want. If you do not have post please tell us as we can also quote on alloy ones. Please also check if there is any slope to the current driveway (left to right of the posts) as this will affect the quote and the finished look of the gate. A sloped driveway cost is 15% more than a standard level gate. Once we have this information Easygate will then generate the quote and email this to you for confirmation (email@example.com)
Once confirmed a 50% deposit is required to start the order process and placement on the EasyGate fabrication scheduling. It will take a few weeks to complete the gate ready for delivery. 50% balance of payment is due when EasyGate are ready to deliver your gate. Installation not included
All quotes are based on the gate viewed from inside the property. Tails of the completed gate will therefore be on the left or right depending on the direction the gate will open along your fence. E.g If the gate opens from left to right the tails will be on the left, if your gate requires a sloping bottom rail to match your driveway we need two height measurements from the ground to the top of the gate. First height at the leading end and second height at the tail end. When looking from the inside of the property the top edge of the louvre blade slopes down and away to the outside of the property. Any reinforcing strips are welding on the side viewed from the inside of the property.
Note: Due to the nature of the slats, we will build to the nearest height of complete slat rows to the desired height you provide if it is to be horizontal slats. Similar for length if the slats will be vertical. E.g if you ask for horizontal slats with 10mm gaps to 1.8m high - the installed height will be approx 1.813m
You can order gates by phone 0800774636 or email firstname.lastname@example.org