Papillon 250 articulated gate opener:
No gate stop required in the centre of the driveway as the motors have internal limits so the gates can be set to stop where they need to be
Faster opening and closing
Auto-close function able to be activated/deactivated via remote controls
Latest multi-functional control board
The Papillon is not able to be mounted on a post with a fence running 90° to the gate. The fence has to be parallel with gate to allow room for the articulated arms
The Papillon 250 is designed with articulated levers for an ideal solution for installation on large pillars where the gates are hinged in the centre of the pillar. The main structure of the Papillon 250 is made with aluminium and paint treatment for durability. The electromechanical gear motor and articulated arm is designed for swing gates (each leaf of a double) up to 2.5 meters long and 250kg.
The Papillon 250 is a 24v system making for Easy DIY installation as you do not need mains power at the gate. In the kit is a 24v outdoor step down transformer which is plugged into the nearest 240v power point allowing low voltage cable to be run out to the gate up to 200m away. It also includes back up batteries if there is mains power failure.
Click here for installation manual
Warranty; 1 year back to Base. See terms and conditions on this website
Warning: It is the installer’s responsibility to seal the entry points of cables etc from insects and water entering the housing and compromising the control board.