Remote transmitter suitable only for receivers that have the DIP switch code system used on E-8 control board such as the D1 and D2. Check your control board for the model printed on it.
1 x Black remote with red and green button and slide up button cover which replaces the grey with teal button and the blue button unit.
How to tune a new E-8 remote
Step 1: Remove the fastening screw from the back of the NEW remote with a Philip head driver.
Step 2: Do the same with a remote that is currently activating your gate correctly.
Step 3: Locate the white switches on the remote PCB board. Match the setting for each switch of the old remote with the same switch of the new remote. Each switch has 3 settings…top middle and bottom.
Step 4: Test the new remote activates the gate prior to re-assembly.
Check battery is correctly installed and the right way around (red LED light should shine when button is pressed) Check battery condition with a standard volt metre with 12v DC of power.
Battery size: A(E)23 12v Alkaline
6 Month back to base warranty
0 warranty on batteries