Description

EasyGate 'Classic Bar' design Sliding Gate

This style has square 20 x 20mm pickets (different to the round tube pickets used in other designs), with all pickets going full height from bottom to top of frame. The gaps between the pickets are 80mm, with the square pickets providing extra strength and a different look.

• Built sturdy to allow option automation (electric openers) to be added.
• Aluminium vehicle entrance gates.
• 'Classic Bar' gates are made to order in a range of heights and lengths.
• This design is NOT suitable for having a sloping bottom (look at our Manor design if you do want a sloping bottom).
• Aluminium consrtuction, so it will not rust.
• Lighter than steel yet robust with a large 100 x 50mm bottom rail.
• Outer frame and horizontal beams are 50 x 50mm for great strength.
• Square pickets of 20x20mm, spaced with 80mm gaps.
• Hidden wheels to give a low profile finish
• Heat treated powder coating.

EasyGate Sliding Gates are classed as medium to heavy duty and able to withstand the tough New Zealand working conditions of both domestic and commercial installations.

Note: The "frame length" is the measurement of vertical end to vertical end. EasyGate may add an additional short end extension to the top and bottom rails allowing for the motor and the top guide bracket to be positioned to the side of your driveway - these are called 'tails'. The height is measured from the ground to the top of the gate including wheel and track (low profile wheel configuration). You can increase the height by changing the wheel mounting position giving a further 50mm called “high profile” configuration but you will need to let us know you wish to have your wheel type changed.

Gate Kit Includes: Low profile steel wheels, Alloy wheel track with concrete anchor pins, top roller guide bracket with 2 rollers, front end catcher and rear gate stopper. Heat treated powder coating in Satin Black or upgrade to another standard powder coating colour for an extra $59.

Security capping (optional) can be fitted after gate has been installed to deter intruders from jumping over the top of flat top style gates.

Optional Motor Kit ($799) Includes: 24v Boxer engine with stand-alone transformer (can be placed up to 80m from gate), backup batteries, first 4m of gear rack to fasten to gate and 3 x keyring remotes.

Click Here for installation information:

Click here for colour options: (Extra $49 to change the colour from black)

PRICES INCLUDE GST ex Tauranga EasyGate factory. Delivery can be arranged Nationwide at an extra cost.

The buy now tab linked to this product will not buy you a gate as no gate has been assigned to the tab. You can order gates by phone 0800774636 or email info@easygate.co.nz

Includes

Price includes the following parts needed to install your new EasyGate Sliding Gate.

• 1x Alloy Gate
• 2x Heavy Duty wheels with sealed bearings
• Top Guide Bracket with 2 rollers to keep the gate from falling over
• End Gate Catcher to catch the gate when fully closed and prevent the gate being lifted off the rails
• Wheel Track to secure to your driveway to allow the gate to move left and right
• Mill finish or powder coated as stated above

Manor Sliding Gate Includes: 2 x 100mm Dia hidden wheels, steel wheel track with anchor pins, and top-guide bracket with 2 rollers, side/front mounted end catcher and ground gate stopper. Powder-coated black or change to a Dulux standard colour range for extra $59. Price based on the main frame length plus 300mm extension at one end for motor. Price includes GST ex depot.