The EasyGate Wireless Driveway Alert is built on the same concept as the "rubber hose" alerts you would find at a gas station. The important difference is that this system is wireless! This means quick and easy installation and operation. Like the other Alerts, it has a range of up to 400m (conditions apply), a timed relay output, and many other great features! The system consists of a rubber hose with transmitter, and a receiver.
The transmitter operates on one 9-volt battery and has 10mm diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the receiver up to 600m away*.
The transmitter is weatherproof and meant for exterior locations such as fences and posts. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.
The receiver plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
The receiver is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.
Operating Range:*Actual range will vary depending on the local terrain.