LS Remote used for LS slider G-15 and CTR3 control boards. Swing Gate CTR34, CTR50 and Super12 gate opener control boards. Can be also used on most 433.9 mhz alarm systems and garage door openers.
Up to 30m range.
Style subject to availablity
6 Month back to base warranty
0 warranty on batteries
Tuning your LS slider G-15 control board
Remote system: The receiver card is 433.92 MHz and removable for service. Remotes have several buttons on them for different applications with the same freq card fitted.
Remote learn: Remove the cover of the gate motor control box using a Phillips head screw driver. You will now be able to view the motor control board. Locate and press the “CODE Learn” black button once and red Led light will light ON (max 20 seconds). Pickup your new remote and press once the button at the top, the LED light on the control board will go OFF then press same button on your remote again. If the LED light blinks, the learning is completed. Only 1 button on each remote can be learnt at any one time.
Remote (all) erase: Press CODE learn button for more than 8 seconds AND ALL REMOTES WILL BE ERASED.
Use of remote: When remote is pressed it will activate a single cycle. When pressed again it should stop the cycle. Pressed again will activate the opposite cycle as the one before. We recommend you place it loose in your vehicle so as when you point it through your window, it will give the best line of sight than on your key ring due to metal interference.
Care of remotes: Moisture can damage your remote so keep in a dry place. Do not place in you rain coat pocket. Do not place next to a microwave oven or transformer. Replacement batteries and extra remotes are available from www.easygate.co.nz