Animal Friendly Sliding Gate
This Animal Friendly design has narrower 60mm gaps between the pickets to help keep animals in (or out).
Keep Your Pets In With EasyGate's Animal Friendly Sliding Gate
Gate Kit Includes: Low profile steel wheels, Alloy wheel track with concrete anchor pins, top roller guide bracket, front end catcher and rear gate stopper. Heat treated powder coating in satin Black or upgrade to another standard powder coating colour for an extra $49.
- Narrower 60mm gaps between pickets to keep small dogs at bay.
- Built sturdy to allow optional automation (electric openers) to be added.
- Aluminium vehicle entrance gates.
- Animal friendly gates available in a range of heights - made to order.
- Sloping gates made to measure for about 15-20% extra.
- Lighter then steel yet robust with a large 100 x 50mm bottom rail.
- Outer frame and horizontal beams are 50 x 50mm for great strength.
- Hidden wheels to give a low profile finish.
- Heat treated powder coating.
Aluminium construction so will not rust.
Gap between pickets is 60mm, with all pickets going full height to the top.
EasyGate can build your gate in this particular style from 1m to 5.36m long so ask for a quote (other gate styles can be made longer).
EasyGate Sliding Gates are classed as Medium to heavy duty and able to withstand the tough New Zealand working conditions of both domestic and commercial installations.
Note 1: The "frame length" is the measurement of vertical end to vertical end. EasyGate may add an additional short end extension to the top and bottom rails allowing for the motor and the top guide bracket to be positioned to the side of your driveway - these are called 'tails'. The height is measured from the ground to the top of the gate including wheel and track (low profile wheel configuration). You can increase the height by changing the wheel mounting position giving a further 40mm called “high profile” configuration but you will need to let us know if you wish to have your wheel type changed.
Note 2: Due to the narrower 60mm gaps between pickets of this style, we may 'round' up your frame length during fabrication to the next full picket spacing. This allows a full 60mm gap from last picket to end vertical of gate.
Sloping Gates: Add 15-20% to change the bottom rail depending on angle. Up to 290mm
Security capping (optional) can be fitted after gate has been installed to detour intruders jumping over the top of Animal Friendly style gates.
Please email "email@example.com" or "David@easygate.co.nz" with your details for a custom quote!