Photocell (Safety) Beams
A pair of photocell / safety / infra-red beams to go across a driveway.
A Recommended Product:
These can be referred to as Safety Beams, Infra-red Beams, or Photocells.
Photocells are used primarily as a safety device to detect the presence of a vehicle or person through an entrance.
Photocells placed on each side of a gate driveway, will increase your hazard management of your gate opener system.
Designed to detect objects that may be in the way of a closing gate by sending an infra-red beam between the 2 x safety beams. If the beam is broken by an object, child, car etc it sends a signal to the control board of your opener to STOP and return to the fully OPEN position. This will avoid costly damage and injury.
Designed to detect objects passing through the beams across your driveway and activate the gate opener.
Note: Photocells sold as a pair (one for each side of your driveway)
Photocells require a low voltage network cable connected to the gate opener control board from both beams. Power is supplied from your 12v connector point on the gate opener control board.
Compatible with all EasyGate gate openers
6 month back to base warranty